Datasheet

Irrtümer und Änderungen vorbehalten / Subject to modication without notice, errors and omissions excepted
© EA-Elektro-Automatik GmbH, 2013
EA-IF Interfaces
EA-IF SERIE / EA-IF SERIES
DIGITALE & ANALOGE SCHNITTSTELLENKARTEN / DIGITAL & ANALOG INTERFACE CARDS
h Nachrüstbar, steckbar, austauschbar
h Einfache Installation (Plug & Play)
h Leichte Konguration über Setup-Menü am Gerät
h Einfache Vernetzung von verschiedenen Geräten
h Galvanische Trennung bis zu 2000V
h Software-CD mit Anleitungen und Software
h LabView VIs für bestimmte Schnittstellen
h Retrottable, pluggable, replaceable
h Simple installation (plug ’n play)
h Easy conguration via a setup menu on the device
h Simple networking of different devices
h Galvanic isolation up to 2000V
h Software CD with tools and documentation
h LabView VIs for selected interfaces
General
The EA interface cards are pluggable digital or analog cards
for selected series of programmable power supplies, battery
charger or electronic loads.
There are special shortened versions (models with a „2“ at the
end of the article name) available for wall mount series PSI 800
R and BCI 800 R. See table below.
Support for LabView
For the digital interface with USB, RS232, GPIB and Ethernet
we provide ready-to-use LabView VIs. See table below.
Support for other programming languages
The communication protocol is documented and included in
the package. Thus all interfaces can be integrated in virtually
any programming language.
Software and drivers
The interface cards are delivered with a tools CD that includes
documentation and software. The software is divided into the
Windows software suite EasySoft (also see page 21) and
LabView compatible VIs. For the software and device support
of the particular interface cards see table below.
Applications
The interfaces cover many application areas. For example, USB
is practically available everywhere with a PC. With RS232, the
user can bridge distances of up to 30m between device and PC.
Using Ethernet many devices can be integrated into a standard
local or company network and can be controlled and monitored
from a central location.
CAN is used to network multiple devices directly, making it
easier to connect a string of power supplies or electronic loads
to the controlling unit, such as PC or PLC.
Allgemeines
Die EA-Schnittstellenkarten sind digitale bzw. analoge Steck-
karten für bestimmte Serien von programmierbaren Netzgerä-
ten, Batterieladern und elektronischen Lasten.
Für die Wandmontagegeräte der Serien PSI 800 R und BCI
800 R sind verkürzte Spezialversionen verfügbar (Modelle mit
einer „2“ am Ende der Verkaufsbezeichnung).
Unterstützung für LabView
Für die digitalen Schnittstellen USB, RS232, GPIB und Ether-
net sind fertige LabView-VIs verfügbar. Siehe Tabelle unten.
Unterstützung in anderen Programmiersprachen
Das zur Kommunikation verwendete Protokoll ist in der mit-
gelieferten Dokumentation offengelegt und kann daher in den
diversen Programmiersprachen umgesetzt werden.
Software und Treiber
Mit den Schnittstellenkarten wird eine CD geliefert, die Anlei-
tungen und Software enthält. Die Software ist unterteilt in die
Windows-Anwendersoftwaresuite EasySoft (siehe auch Seite
21) und LabView-kompatible VIs. Welche Karte bzw. welches
Gerät zu welcher Software kompatibel ist, siehe Tabelle unten.
Anwendungsgebiete
Die Schnittstellen eignen sich für die verschiedensten An-
wendungen. USB ist praktisch überall verfügbar, wo ein PC
ist. Mit RS232 lassen sich Entfernungen zwischen PC und
Gerät von bis zu 30m überbrücken, mittels Ethernet lassen
sich viele Geräte in ein vorhandenes Netzwerk integrieren
und von einer zentralen Stelle aus steuern. Mit CAN können
gleichartige oder unterschiedliche Geräte untereinander direkt
vernetzt werden, was die Anbindung an die steuernde Einheit
(PC, SPS) vereinfacht.