Datasheet
© EA Elektro-Automatik, 2016 Irrtümer und Änderungen vorbehalten / Subject to modication without notice, errors and omissions excepted 107
Programmierbare elektronische DC-Lasten / Programmable electronic DC loads
EA-EL 9000 B HP 600 W - 2400 W
Das große, farbige TFT-Touchpanel oeriert eine intuitive Art der manuel-
len Bedienung, wie man sie von Handys oder Tablets kennt.
Reaktionszeiten für die Steuerung über analoge oder digitale Schnittstel-
len sind durch FPGA-gesteuerte Hardware signikant verbessert worden.
Bei einer Parallelschaltung mehrerer Geräte dient ein Master-Slave-Bus zur
Verbindung der Einheiten zu einem Gesamtsystem, das die Istwerte auf-
summiert und die Sollwerte gleichmäßig verteilt.
Leistungen, Spannungen, Ströme
Der Eingangspannungsbereich bietet fünf Spannungsvarianten zwischen
0...80 V DC und 0...750 V DC. Eingangsströme bis 170 A pro Gerät sind ver-
fügbar. Dazu sind pro Spannungsvariante zwei Leistungsklassen verfüg-
bar, z. B. 0...1200 W oder 0...2400 W Dauerleistung bei normalen Umge-
bungstemperaturen für z. B. ein 80 V-Modell.
Bauform
Die Modelle haben ein 19“ breites Rackgehäuse mit 2 HE Höhe und 460 mm
Tiefe, das ideal für die Verwendung in 19“-Schränken unterschiedlicher
Größe (z. B. 42 HE) zum Aufbau eines Systems mit hoher Gesamtleistung
geeignet ist. Auch sind Schranksysteme mit Mischbestückung (Lasten und
Netzgeräte) möglich, um das Quelle-Senke-Prinzip mit hohen Leistungen
zu realisieren.
Bedienung (HMI)
Die manuelle Bedienung erfolgt über ein TFT-
Touchpanel, zwei Drehknöpfe und einen Taster.
Das große farbige Display zeigt alle wichtigen
Soll- und Istwerte gleichzeitig und übersichtlich
an. Weiterhin können über das HMI (Human-ma-
chine interface) das gesamte Setup vorgenommen,
sowie Funktionen (Rechteck, Dreieck und andere)
konguriert werden uvm.
Die Anzeige ist mehrsprachig (Deutsch, Englisch,
Russisch, Chinesisch).
Funktionsgenerator und Tabellenregelung
Ein besonderes Feature ist der komfortable, FPGA-basierte digitale Funk-
tions- und Arbiträrgenerator, der die Steuerung von zeitlich ablaufenden,
frei programmierbaren Lastprolen ermöglicht. Damit können sich ab-
wechselnde Sinus- und Rechteckfunktionen oder auch Sägezahn- bzw
Rampenverläufe generiert werden. Mit einer im Regelkreis eingebetteten,
frei programmierbaren, digitalen Wertetabelle mit 3276 eektiven Stütz-
punkten können nichtlineare Innenwiderstände von Verbrauchern, wie
etwa von Batterien oder LED-Ketten, beliebig nachgebildet werden.
The large colour TFT touch panel oers an intuitive kind of manual opera-
tion, such as it is prolic nowadays with smartphones or tablet computers.
Response times for the control via analog or digital interfaces have been
improved by the FPGA controlled hardware.
In parallel operation of multiple devices, a master-slave bus is used to link
the units to a bigger system where the actual values are totalled and the
set values distributed.
Power ratings, voltages, currents
The available voltage range portfolio oers ve dierent voltage from
0...80 V DC up to 0...750 V DC. Input currents up to 170 A with only one unit
are available. The series oers two power classes for every voltage class, for
example 0...1200 W or 0...2400 W steady power at normal ambient temper-
atures with, for instance, an 80 V model.
Construction
All models are built in 19“ wide rack enclosures with 2U of height and 460
mm of depth, which makes them ideal for use in 19“ cabinets of various
sizes, for example 42U, and for the design of systems with very high power.
It is furthermore possible to build cabinet systems with mixed equipment,
i.e. electronic loads and power supplies, in order to achieve the source-sink
principle with high power ratings.
Handling (HMI)
Manual operation is done with a TFT touch panel,
two rotary knobs and a pushbutton. The large col-
our display shows all relevant set values and actu-
al values at a glance. The whole setup is also done
with the human-machine interface, as well the
conguration of functions (square, triangle, sine)
etc.
The display is multilingual (German, English, Rus-
sian, Chinese).
Function generator and table control
A special feature is the comfortable, FPGA based, digital function and arbi-
trary generator. It enables controlling and running user-customisable load
proles and can generate sine, square, saw tooth and ramp functions in
arbitrary order.
With a freely programmable digital value table of 3276 eective points,
which is embedded in the control circuit, the devices can reproduce
non-linear internal resistances, such as those of batteries or LED chains.
Share-Bus
Der sogenannte „Share-Bus“ auf der Rückseite der Geräte dient bei Paral-
lelschaltung zur Stromsymmetrierung gleichwertiger Gerätemodelle, z. B.
Lasten dieser Serie und der Serie EA-EL 9000 B. Außerdem kann er zum
Aufbau eines Zwei-Quadranten-Systems mit Labornetzgeräten der Serien
EA-PSI 9000, EA-PS 9000 oder EA-PSE 9000 genutzt werden, um spezielle
Prüfsysteme zum Test von Prüingen nach Quelle-Senke-Prinzip realisie-
ren zu können.
Share Bus
The so-called „Share Bus“ is an analog connection at the rear of the devices
and is used to balance current across multiple similar units in parallel con-
nection, such as with loads of this series and series EA-EL 9000 B.
It can also be used to build a two-quadrants system in connection with
power supplies of series EA-PSI 9000, EA-PS 9000 and EA-PSE 9000. This
system is dedicated for testing purposes using the source-sink principle.
1 3 4 5 62
Dreieck Rechteck Trapez Sinus Rampe DIN 40839
Triangle Rectangle Trapezoid Sine Ramp
A
B
C
D
E
F
G
H
I
J