Datasheet

© EA Elektro-Automatik, 2016 Irrtümer und Änderungen vorbehalten / Subject to modication without notice, errors and omissions excepted106
Programmierbare Elektronische DC-Lasten
Programmable Electronic DC loads
EA-EL 9000 B HP 600 W - 2400 W
Leistungen: 0...600 W bis 0...2400 W
Eingangsspannungen: 0...80 V bis zu 0...750 V
Eingangsströme: bis zu 170 A pro Gerät
FPGA-basierte Regelung
Mehrsprachige, farbige Touchpanel-Bedieneinheit
Benutzerprofile, Funktionsgenerator
Einstellbare Schutzfunktionen: OVP, OCP, OPP
Betriebsmodi: CV, CC, CP, CR
Galvanisch getrennte Schnittstellen (analog und USB)
Master-Slave-Bus für Parallelschaltung
Optional:
Digitale, steckbare Schnittstellenmodule
SCPI- und ModBus RTU-Protokoll
LabView VIs und Steuerungssoftware (Windows)
Power ratings: 0...600 W up to 0...2400 W
Input voltages: 0...80 V up to 0...750 V
Input currents: up to 170 A per unit
FPGA based control circuit
Multilingual colour touch panel
User profiles, true function generator
Adjustable protections: OVP, OCP, OPP
Operation modes: CV, CC, CP, CR
Galvanically isolated interfaces (analog and USB)
Master-slave bus for parallel connection
Optional:
Digital, plug & play interfaces
SCPI & ModBus RTU supported
LabView VIs and remote control software (Windows)
EA-EL 9080-170 B HP 2U
Allgemein
Die elektronischen DC-Lasten der neuen Serie EA-EL 9000 B HP lösen die
bisherige Serie EA-EL 9000 HP ab und reduzieren gleichzeitig die notwen-
dige Einbauhöhe von früher mindestens 3 HE auf heute 2 HE. So können
die maximal 7200W Dauerleistung einer EA-EL 9000 HP heute in nur 6 HE
Bauhöhe realisiert werden, wozu bisher 9 HE nötig waren. Das bringt eine
Platzersparnis von 33% und bedeutet, daß in einem 19“-Schrank mit z. B.
42 HE noch mehr Leistung untergebracht werden kann.
Die Geräte unterstützen die vier typischen Regelungsarten Konstantstrom
(CC), Konstantspannung (CV), Konstantleistung (CP) und Konstantwider-
stand (CR). Zusätzlich bietet die FPGA-basierte Regeleinheit eine Reihe in-
teressanter Features, wie einen Funktionsgenerator mit Tabellenfunktion
zur Simulation von nichtlinearen Innenwiderständen.
General
The electronic DC loads of series EA-EL 9000 B HP replace the former series
EA-EL 9000 HP and reduce the required unit height from former minimum
3U to now only 2U. It means that the steady power of 7200 W of a former
EA-EL 9000 HP device can nowadays already be achieved in 6U of height
where it required 9U before. The result is a space saving of 33% which al-
lows for achieving even more power in a 19” cabinet.
All models support the four common regulation modes constant voltage
(CV), constant current (CC), constant power (CP) and constant resistance
(CR). The FPGA based control circuit provides interesting features, such as a
function generator with a table based function for the simulation of non-
linear internal resistances.
U I P R OVP
OCP OPP OTP
19“
USB
MS IFAB
Option:
A
B
C
D
E
F
G
H
I
J

Summary of content (4 pages)