Datasheet

© EA Elektro-Automatik, 2016 Irrtümer und Änderungen vorbehalten / Subject to modication without notice, errors and omissions excepted 97
Programmierbare elektronische DC-Lasten / Programmable electronic DC loads
EA-EL 9000 DT 400 W - 1200 W
Digitale Schnittstellen (USB, Ethernet) sind serienmäßig ebenso vorhan-
den wie eine analoge Schnittstelle. Alle sind galvanisch getrennt.
Fernsteuerung und Einbindung in anwenderspezische Prüf- und Testsoft-
ware wird durch gängige Kommunikationsprotokolle wie SCPI und Mod-
Bus, sowie fertige LabView-Bausteine erleichtert.
Leistungen, Spannungen, Ströme
Der Eingangspannungsbereich reicht von Modellen mit 0...80 V DC bis zu
Modellen mit 0...750 V DC. Eingangsströme von 0...5 A bis zu 0...60 A pro
Gerät sind verfügbar. Die Serie bietet zwei Leistungsstufen mit 600 W oder
1200 W Spitzenleistung.
Bedienung (HMI)
Die manuelle Bedienung erfolgt über ein TFT-
Touchpanel, zwei Drehknöpfe und einen Taster.
Das große farbige Display zeigt alle wichtigen
Soll- und Istwerte gleichzeitig und übersichtlich
an. Weiterhin können über das HMI (Human-ma-
chine interface) das gesamte Setup vorgenommen,
sowie Funktionen (Rechteck, Dreieck und andere)
konguriert werden uvm.
Die Anzeige ist mehrsprachig (Deutsch, Englisch,
Russisch, Chinesisch).
Funktionsgenerator
Alle Modelle dieser Serie verfügen über einen Funktionsgenerator, der
typische Funktionen, wie unten in der Grak dargestellt, generieren und
entweder auf die Eingangsspannung oder den Eingangsstrom anwenden
kann. Dieser kann komplett am Gerät über das Touch-Panel konguriert
und gesteuert werden, oder aber auch per Fernsteuerung über eine der di-
gitalen Schnittstellen.
Die vordenierten Funktionen bieten alle nötigen Parameter der jeweili-
gen Funktion, wie der Y-Oset, Zeit bzw. Frequenz oder die Amplitude, zur
freien Einstellung durch den Anwender.
Digital interfaces, such as USB and Ethernet, are standard with this series,
as well as an analog one. All interfaces are galvanically isolated.
Remote control and implementation into custom applications for every
purpose is simplied by the common protocols SCPI and ModBus, as well
as by ready-to-use LabView components.
Power ratings, voltages, currents
The voltage range portfolio goes from models with 0...80 V DC up to models
with 0...750 V DC. Input currents with 0...5 A up to 0...60 A per unit are avail-
able. The series oers two power classes with 600W or 1200 W peak power.
Handling (HMI)
Manual operation is done with a TFT touch panel,
two rotary knobs and a pushbutton. The large col-
our display shows all relevant set values and actu-
al values at a glance. The whole setup is also done
with the human-machine interface, as well the
conguration of functions (square, triangle, sine)
etc.
The display is multilingual (German, English, Rus-
sian, Chinese).
Function generator
All models within this series include a function generator which can gen-
erate typical functions, as displayed in the gures below, and apply them
to either the input voltage or the input current. The generator can be com-
pletely congured and controlled by using the touch panel on the front of
the device, or by remote control via one of the digital interfaces.
The predened functions oer all necessary parameters to the user, such as
Y oset, time / frequency or amplitude, for full conguration ability.
Zusätzlich zu den Standardfunktionen, die auf einem sogenannten Arbi-
trärgenerator basieren, ist dieser arbiträre Generator oen zugänglich, um
komplexe Abläufe für z. B. Produktprüfungen aus bis zu 100 Sequenzen er-
stellen und ablaufen lassen zu können. Diese Sequenzen können mittels
USB-Stick und dem USB-Port am Bedienfeld gespeichert und geladen wer-
den, um so einen schnellen Wechsel zwischen verschiedenen Test- bzw.
Prüfsequenzen zu ermöglichen.
Batterietest
Für den Test aller Arten von Batterien, z. B. mit Konstantstrom- oder Kon-
stantwiderstands-Entladung bieten die Geräte einen Batterietest-Modus.
Dieser zeigt gesondert Werte wie die abgelaufene Testzeit, entnommene
Energie (Wh) und Kapazität (Ah) an.
Die während des Tests über einen PC z. B. mit EA Power Control (siehe Seite
177) aufgezeichneten Daten können als Excel-Tabelle im CSV-Format ex-
portiert und ausgewertet werden (Entlade-Diagramm).
Eine einstellbare, maximale Testzeit sowie eine variable Entladeschluß-
Spannung ergänzen die vorhandenen Einstell-Möglichkeiten.
Additionally to the standard functions, which are all based upon a so-called
arbitrary generator, this base generator is accessible for the creation and
execution of complex sets of functions, separated into up to 100 sequenc-
es. These can be used for testing purposes in development and production.
The sequences can be loaded from and saved to a standard USB ash drive
via the USB port on the front panel, making it easy to change between dif-
ferent test sequences.
Battery test
For purposes of testing all kinds of batteries, such as for example constant
current or constant resistance discharging, the devices oer a battery test
mode. It counts values for elapsed testing time and consumed capacity (Ah)
and energy (Wh).
Data recorded by the PC during tests with EA Power Control can be export-
ed as Excel table in CSV format and analysed later in MS Excel or similar
tools and even visualised as a discharge diagram.
For more detailed setup, there is also an adjustable threshold to stop the
battery test on low battery voltage, as well an adjustable maximum test
period.
1 3 4 5 62
Dreieck Rechteck Trapez Sinus Rampe DIN 40839
Triangle Rectangle Trapezoid Sine Ramp
A
B
C
D
E
F
G
H
I
J