Datasheet

ELEKTRISOLA Copper Magnet Wire Types
ELEKTRISOLA
- Product - Name
Polysol 155
ELEKTRISOLA
- Product - Code
P155
General
Description mod. Polyurethane
Standards
IEC
(including the following norms)
IEC 60317-20,
IEC 60317-4
NEMA
(including the following norms)
MW79 ,
MW2, MW75
UL-approval yes
Diameters available 0.01 - 0.50 mm
Technical values
1.
Thermal values
Temperature index 20.000 h acc. to IEC 60172
158°C
Cut through temperature min °C acc. To IEC 60851.6.4
³
200°C
Elektrisola typical values for 0.05 mm/0.25 mm, Grade 1
225 / 230°C
Heat shock min °C acc. to IEC 60851.6.3
³
175°C
Elektrisola typical values for 0.05 mm/0.25 mm, Grade 1
190 / 180°C
2.
Electrical values
Low voltage continuity max. acc. to IEC 60851.5.1 for 0.05 mm/0.025 mm
£
40 /
£
10
Elektrisola typical values for 0.05 mm/0.25 mm, Grade 1
0 / 0
High voltage continuity max. acc. to IEC 60851.5.2 for 0.05 mm/0.25 mm
£
40 /
£
10
Elektrisola typical values for 0.05 mm/0.25 mm, Grade 1
2 / 1
Pin hole acc. to IEC 60851.5.7, with 0 % and 3 % elongation not resistant
Breakdown voltage (at 20°C, 35% humidity), acc. to IEC 60851.5.4
Elektrisola typical values acc. to cylinder test 0.05 mm/0.25 mm, Grade 1
240 / 180 V/
m
m
Decrease of breakdown voltage in % at elevated temperature
Elektrisola typical values for 0.05 mm/0.25 mm, Grade 1, in % at °C
25 % at 155°C
3.
Mechanical values
Elongation min. acc. to IEC 60851.3.3 for 0.05 mm/0.25 mm, Grade 1
³
14% /
³
25%
Elektrisola typical values for 0.05 mm/0.25 mm, Grade 1
23% / 40%
Tensile strength
Elektrisola typical values for 0.05 mm/0.25 mm, Grade 1
57 / 1370 cN
4.
Chemical compatibility
Standard solution
Pancil Hardness acc. to IEC 60851.4.3 / untreated
4H / 4H
Decrease of breakdown voltage in %
5 %
General statements about chemical compatibility are not possible due
to the high number of influencing factors such as winding,
impregnationmoulding and cleaning materials etc.
5.
Solderability
acc. to IEC 60851.4.5, max. seconds at °C für 0.05mm/0.25mm 2s/390°C / 2s/390°C
Elektrisola-typical values acc. to IEC 60851.4.5
for 0.05 mm, Grade 1, seconds at °C
0.3s/370°C / 0.2s/390°C
for 0.25 mm, Grade 1, seconds at °C
0.7s/370°C / 0.5s/390°C
Properties
Very good solderability, good thermal
properties, low sensitivity against humidity.
Applications
Used in small transformers, linear
motors, relays, solenoids, small
motors, clock coils, fly-back-transformers,
magnetic heads, instruments.
06/09
ELEKTRISOLA typical values are the result of various tests and represent average values.