** LINEAR FLOOR DRAIN INSTALLATION INSTRUCTION DRAIN COMPONENTS TYPEⅠ TYPEⅡ 1 / 6
** NOTE Thoroughly inspect the product and its components before installation. Please report any damaged or missing components to ** for a replacement, return or repair. Your request will be responded to within 2 working days. The information provided in this instruction guide are general guidelines and a licensed professional should always be present during installation. Consult local building codes to ensure the installation complies with the standards in your area.
** INSTALLATION STEPS The following installation details do not cover every possible situation, some may not be appropriate for DIY. Always consult with a licensed professional before installation.
** STEP 1. Coupling the drain base outlet to 2″ schedule 40 DWV pipe using correct solvent cement. STEP 2. Blocking the drain opening with a rag, trowel mortar to build shower pan, reinforce around drain base to be flush with the floor, grate to create MIN 1% slope towards the drain. STEP 3. Remove the rag. Lay the waterproof membrane on whole shower pan and cut a slit for the bolts to poke through, then cut away the waste hole in the center.
** STEP2. Carefully measure the inside opening frame of the tray, cut the insert-tile as required size, maximum tile thickness 14mm. (Figures in picture2 are for reference only.) STEP3. Put the strainer, tray and the finished tile in the drain body successively. Note about step3: ① Optional: Apply adhesive or silicone on the back and perimeter of tile before laying. If you do, please scrape the excess tile adhesive, clean up the tile surface and the tray after laying.
** ** DRAIN BASE ◆Cut four small slits in the membrane over the bolts ◆ Not suitable for “hot-mop” painted membrane considering fire hazard. ◆PVC&ABS base optional to be compatible with different plumbing pipe. ◆Be sure to use PROPER solvent cement to 1. Rubber Coupling/Gasket (supplied by others) 2. Threaded Adaptor (supplied by **) 3. Steel bolts 4. Membrane Clamp 5. Waterproof Membrane (supplied by others) 6. Drain Base connect with PVC OR ABS pipe.
