Datasheet

ManualsBrandsEledis ManualsNon-Illuminated Pushbutton SwitchesSubminiature Pushbutton Switch

HOW TO ORDER

C 22

PUSH BUTTONS

CHARACTERISTICS

• Tiny and sealed switch suitable for

environmentally hard usage.

• Carries up to 3 Amps @ 120 VAC or

28 VDC.

SERIES 6B

• Sealed Sub-miniature

pushbutton

eledis

B E6

ELECTRICAL FUNCTIONS

11 on (on)

52 off (on)

TERMINATIONS

PC PCB

H9 90° horizontal

H9S 90° horizontal snap-in

V9 90° vertical

V9S 90° vertical snap-in

U2 U bracket 11.68 mm

U2S U bracket snap-in 11.68 mm

ACTUATORS

none Plunger 5.46

FP Flush Type

CONTACT MATERIAL

S Silver

A Gold

K(∆) Gold/Tin-Lead

G Gold over Silver

SEALING

E Seal

CAP OPTIONS

C3 Diam. 5.08mm

C4 Diam. 7.62mm

SPECIFICATIONS

Contact Rating: S (silver) - 3A @ 120 VAC or 28

VDC - A (gold) or K (gold/tin-lead) - 0.4 VA max @

20 VAC or DC max

Electrical life: 50,000 make and break cycles at full

load

Contact Resistance: 20 mΩ max. initial @ 2-4 VDC

- 100 mA, for both silver and gold plated contacts

Insulation Resistance: 1000 MΩ min.

Dielectric Strength: 1500 VRMS @ sea level

Operating Temperature: -30°C to 85°C

MATERIALS

Case & bushing: Glass filled nylon 6/6, flame retar-

dant, heat stabilized (UL94V-0)

Plunger: Thermoplastic polyester (UL94V-0) with inter-

nal o-ring seal

Switch support: Brass, tin plated

Terminal seal: Epoxy

CAP COLOURS

OPTIONS

1 (∆) White

2 Black (std)

3 Red

4 (∆) Orange

5 (∆) Yellow

6 (∆) Green

7 (∆) Blue

8 (∆) Brown

9 (∆) Gray

(∆) Min qty required

AGENCY APPROVALS

In conformity with:

• EN 60529: 1991

• IEC 529: 1989

IP67

Summary of content (5 pages)

PAGE 1
® PUSH BUTTONS SERIES 6B AGENCY APPROVALS IP67 • Sealed Sub-miniature pushbutton SPECIFICATIONS Contact Rating: S (silver) - 3A @ 120 VAC or 28 VDC - A (gold) or K (gold/tin-lead) - 0.4 VA max @ 20 VAC or DC max Electrical life: 50,000 make and break cycles at full load Contact Resistance: 20 mΩ max. initial @ 2-4 VDC - 100 mA, for both silver and gold plated contacts Insulation Resistance: 1000 MΩ min.
PAGE 2
® PUSH BUTTONS SERIES 6B ELECTRICAL FUNCTIONS Type off (on) PUSH BUTTONS SPST 52 DIMENSIONS Part N° shown: 6B52-PCAE SPDT 11 Type on (on) 2-1 2-3 Part N° shown: 6B11-PCAE TERMINATIONS .215 5.46 .162 4.11 EPOXY SEAL .320 8.13 .020 0.51 H9 SPST .030 TYP. 0.76 .200 5.08 .100 DIA. 2.54 .015 0.38 .130 3.30 .030 TYP. 0.76 .165 4.19 P.C. LAYOUT .200 5.08 .020 TYP. 0.51 .200 5.08 .043 DIA ø1.09 .200 5.08 .200 5.08 Part N° shown: 6B52-H9AE P.C.
PAGE 3
® PUSH BUTTONS SERIES 6B TERMINATIONS P.C. LAYOUT PUSH BUTTONS U2 SPST Part N° shown: 6B52-U2AE P.C. LAYOUT H9 SPDT Part N° shown: 6B11-H9AE P.C.
PAGE 4
® PUSH BUTTONS SERIES 6B TERMINATIONS PUSH BUTTONS P.C. LAYOUT U2 SPDT Part N° shown: 6B11-U2AE H9S V9S U2S HS9, V9S, US have the same P.C. Mounting but with snap-in bracket.
PAGE 5
® PUSH BUTTONS SERIES 6B CONTACT MATERIALS CONTACT RATINGS PUSH BUTTONS S Moving Contacts: coin silver, silver plated Center Contacts and all Terminals: brass, silver plated Rating: 3 Amps with resistive load @ 120 VAC or 28 VDC 1.5 Amps with resistive load @ 250 VAC A Moving Contacts: brass, gold plated over nickel plate Terminals: brass, gold plated over nickel plate Rating: 0.