User guide

2-34 Emerald ICE Deluxe Telephone User Guide
Telephone Setup
2
Feature Code: PGM
p61
Description
The Access Code feature allows you to store a four-digit code so you can dial it by
pressing only one button. To operate, the Access Code must be stored on a
Feature/DSS Button. This feature is typically used to store a password for the voice
mail mailbox.
Storing a Code
1. While the telephone is idle, access Feature/DSS Button Programming
(
PGM
p#3
) and then press the Feature/DSS Button to be stored with
your Access Code.
2. Press
[chg].
3. Press
[feat].
4. Press
PGM
p61
+ {the four-digit code to store}.
5. Press
[save].
6. Press
S
to exit Feature/DSS Button Programming.
Using the Access Code
1. Access the voice mail system (either the Emerald ICE Voice or an external
voice mail system) by pressing the Feature/DSS Button designated as
VOICE MAIL (if programmed).
2. When you hear the prompt to enter your password, press the Access Code
button.
2.20 Access Codes
AVAILABLE KEY
chg
SELECT FUNCTION
dir pgm
FTR CODE:_
bksp save chg