User guide

4-4 Emerald ICE HD Voicemail Mailbox User Guide
Additional Operations
4
To erase your temporary greeting:
1. At the main menu, press
3
for personal options.
2. Press
1
for greeting, then press
3
for erase.
3. Press
3
for temporary greeting.
3
→
2
→
2
→ Create /→
0
→ Mailbox → Enter →
#
Modify access access
code code
There is one access code that is associated with each user mailbox. Each access
code may be from 1 to 9 digits long. The system administrator can program a
minimum and maximum length for mailbox access codes. Zero should not be
used as the first digit. An initial, temporary access code is given to each user and
is used to enter the system for the very first time. It should not be used again.
Your access code should represent numbers that are easy for you to remember yet
not easily guessed by other people. You are strongly discouraged from using
birthdays, employee numbers, social security numbers, etc., since these numbers
could be readily guessed by others. You are encouraged to change your access
code frequently.
To change your access code, use the personal options menu:
1. From the main menu, press
3
.
2. Press
2
for access code, then press
2
to create/modify an access code.
3. Press
0
for mailbox access code.
4. Enter the access code you have decided on, then press
#
.
4.7 Erase Your Temporary Greeting
4.8 Personal Access Code