User Manual

Stacking full-range systems with subwoofers
This configuration allows a user to increase the low frequency performance without using
additional amplifier channels (ZLX-15 and EKX-18S versions shown).
Mixer
Q99
Amplifier
Input A
Input B
Output A
Output B
ZLX-12
or
-15
ZLX
EKX-15S
or
-18SEKX
30 Hz
high pass
filter (from
mixer or
processor)
NL4 Pin Configuration
Pin 1+ and 1- Used
Pin 2+ and 2- Not used
!
Caution!
Do not exceed the maximum load rating of the amplifier.
Amplifier Load (per Output Channel)
# of Subwoofer/Full-Range
Combinations
Nominal Minimum
1 4 Ohms 3.8 Ohms
2 2 Ohms 1.9 Ohms
6.2.3
ZLX Series
2015.12 | 02 | F.01U.319.253 User Manual Electro-Voice