User guide

Appendix A: Control Protocol IMAGESTAR HD USER GUIDE
Page 88 I460GB issue 4
SetOffset
Function
Applies a position offset to the image on a specified output, to allow correct
stitching of the target display screens.
Format SetOffset=<output number>,<horizontal offset>,<vertical offset>,0,0,0\r
Arguments <output number> is the output channel number:
0 = Output 1
1 = Output 2
2 = Output 3
3 = Output 4
<horizontal offset> is an offset value measured in pixels. A negative value shifts
the image to the left, a positive number shifts it to the right.
<vertical offset> is an offset value measured in pixels. A negative value shifts the
image up, a positive number shifts it down.
Example SetOffset=1,5,-10,0,0,0\r
Shifts the image on output 2 to the right by 5 pixels and up by 10 pixels.