User guide

Appendix A: Control Protocol IMAGESTAR HD USER GUIDE
Page 78 I460GB issue 4
Input Setup Commands
SetAutoDet
Function
Enables Auto Detect mode on a specified input or, if already in this mode, forces
the source to be re-detected.
Format SetAutoDet=<channel>,0,0,0,0,0\r
Arguments <channel> is the input channel number:
0 = Input 1 (RGB)
1 = Input 2 (RGB)
2 = Input 3 (VIDEO / S-VIDEO)
3 = Input 4 (VIDEO)
Example SetAutoDet=3,0,0,0,0,0\r
Sets Input 4 to auto detect mode.