User guide

IMAGESTAR HD USER GUIDE Section 4: Technical Data
I460GB issue 4 Page 65
Control Inputs/Outputs
USB Connector
Function: Downloading new firmware.
Connector Type: USB type ‘B’ Socket.
Pin-out Details:
(view into socket)
Pin Function
1 +5V
2 Data –
3 Data +
4 Ground
Mating Connector: USB type ‘B’ Plug with metal cover.
Recommended Cable: USB Cable.
Maximum Cable Length: 5 metres (16 feet).
Comms Standard: USB 2.0.
Network Connector
Function: Device setup and for downloading new firmware.
Connector Type: Shielded RJ-45 Socket.
Pin-out Details:
Pin Function Pin Function
1 TX_D1+ (TX+ ) 5 BI_D3–
2 TX_D1– (TX– ) 6 RX_D2– (RX– )
3 RX_D2+ (RX+) 7 BI_D4+
4 BI_D3+ 8 BI_D4–
Mating Connector: Shielded RJ-45 Plug.
Recommended Cable: Shielded twisted pair (STP).
Max. Cable Length: 100 metres (330 feet).
Comms Standard: 10/100BASE-T (Fast Ethernet)
Default IP Address: Factory-set to 172.28.232.65.
User-definable via control software.