User guide

Section 3: Configuration IMAGESTAR HD USER GUIDE
Page 58 I460GB issue 4
To update the Input/Output Settings of an ImageStar HD…
 In the ImageStar HD Devices window click on the ImageStar icon to highlight it (thick red
outline):
 Click the Devices menu and choose Update.
The Commands dialog will appear, showing a list of commands that will be sent to the
ImageStar HD device:
HINT: If required, you can prevent a command from being sent by deselecting the checkbox
next to the command line. You can also save the command list as a text file by clicking
the Export button.
 To send the selected commands, click OK.
The following message will appear:
NOTE: A reboot is only necessary when changing the Output Format to or from SXGA+.
 Click OK and, if necessary, reboot the device (see page 41).
IMPORTANT NOTE: Remember that the control connection established between ImageStar
Configuration and the ImageStar HD is not maintained following a reboot operation. Therefore,
you will need to ‘disconnect’ then ‘reconnect’ to the device to restore the connection.