User guide

Section 3: Configuration IMAGESTAR HD USER GUIDE
Page 52 I460GB issue 4
Adding Screens to the Wall Layout
The Wall Layout provides a representation of the target display. One screen is required for each
display device in the target display and these must be positioned and aligned to match the real
display.
 Click the button to select the Screen Layer.
 Click the button to select Add Screen mode.
 Click in the Wall Layout window – each click will add a new screen to the layout.
 To turn off Add Screen mode, click the button.
 Move each screen into the required position by dragging it with the mouse or by using the
keyboard arrow keys.
NOTE: The arrow keys move the screen in increments of 10 pixels.
 To delete a screen from the layout, click on it and press the Delete key (or choose Delete
from the Edit menu).
 To precisely adjust a screen position, double click a screen to open its Properties dialog (or
choose Properties from the Edit menu).
 Adjust the Top and Left pixel coordinates as required, and click OK.
NOTE: Pixel coordinates are measured from the extreme top left corner of the Wall Layout
window, i.e. Top=0, Left=0. Pixel coordinates sent to the ImageStar HD are relative to
the top-left corner of the associated source clip.
 Click the OK button.