User guide

IMAGESTAR HD USER GUIDE Section 3: Configuration
I460GB issue 4 Page 51
Setting-up the Display Outputs
Setting the Output Mode
Setting the Output Mode determines the signal type that the ImageStar HD outputs to the display
devices. It also defines the size/resolution of the screen icons in the Wall Layout window.
 Click on the Wall Layout window to highlight it.
 Click the Layout menu and choose Set Resolution.
The Screen Resolution dialog will appear:
 Select the appropriate Output mode for driving your display devices.
 If required, choose GenLock mode and specify any Overscan settings.
HINT: Overscan settings can also be adjusted interactively (see page 60).
 Click the OK button.