User guide

Section 3: Configuration IMAGESTAR HD USER GUIDE
Page 48 I460GB issue 4
To update the Network Settings of an ImageStar HD…
 In the Network window, click the Local Name of the required device.
 Click the Network menu and choose Update.
The Commands dialog will appear, showing a list of commands that will be sent to the
ImageStar HD device:
If required, you can prevent a command from being sent by deselecting the checkbox next to
the command line.
HINT: Clicking the Export button saves the ‘checked’ commands into a text file.
 To send the selected commands, click OK.
The following message will appear:
 Click OK and, when you are ready to do so, reboot the device (see page 41).
IMPORTANT NOTE: Remember that the control connection established between ImageStar
Configuration and the ImageStar HD is not maintained following a reboot operation. Therefore,
you will need to ‘disconnect’ then ‘reconnect’ to the device to restore the connection.