User guide

Section 3: Configuration IMAGESTAR HD USER GUIDE
Page 46 I460GB issue 4
Changing Network Settings for a Device
 In the Network window, double-click the Local Name of the required device.
The ImageStar HD Node dialog box will appear:
 If required, change the Local name label to something more meaningful.
NOTE: The Node name currently serves no purpose and can be ignored.
 Enter a suitable Node IP address and Subnet mask for the device.
NOTE: The Gateway address currently serves no purpose and can be left as zeros.
 When the details are correct, click OK.
IMPORTANT: You will need to ‘connect’ to the device and ‘update’ it for the new network
settings to take effect (see page 47).
Removing a Device
 In the Network window, click the Local Name of the required device.
 Click the Network menu and choose Remove.