User guide

IMAGESTAR HD USER GUIDE Section 1: Introduction
I460GB issue 4 Page 17
Control Capability
Front Panel Control
The SELECT push-button on the front panel provides source selection. Each press will switch to the
next source input. The currently selected source input is shown by the four INPUT indicators (labeled
1 to 4).
IR Control
This feature is not currently supported.
Configuration Software
Initial setup and remote control of the ImageStar HD is achieved using the ImageStar HD
Configuration software running on a separate PC or laptop. For further details, see Section 3.
NOTE: For more detailed information about the control protocol used by ImageStar HD and how to
control it via HyperTerminal, refer to Appendix A.