User guide

HD Player Chapter 6: Timecode
48 Rev. 6.0
In this mode a cue command is required for the timecode trigger to be activated.
Configuring as a Timecode Reader
The HD Player can also be used as a simple timecode reader if verification of incoming timecode is necessary.
Simply select the Receive mode but do not check the Play At option. In this mode the Timecode window will
show the incoming timecode without a clip being played.
Timecode Cable
In the event that you must fabricate your own Timecode cable(s), use the information in the diagram below:
1
TIP
TIP
TIP
TIP
2
SLEEVE
SLEEVE
SLEEVE
SLEEVE
3
4
4-Pin Din
Plug, Male
TC IN (+)
TC IN (-)
TC OUT (+)
TC OUT (-)
RCA, Mal
e
TC OUT
RCA, Mal
e
TC IN
TC OUT, cable
ASSEMBLED CABLE
TC OUT, cable
TC IN (+)
TC IN (-)
TC OUT (+)
TC OUT (-)
RECEPTACLE PINOUT
1
3
2
4
RCA, MaleRCA, Male