Install Instructions
3
Stinger User Instructions.
Example Card:
Vehicle Operation
1. Enter the code. (the first time, enter the last four digits found
on the KEEP IN SAFE PLACE card) In this example for Stinger
170100206, the User code would be: 3433.
2. Press red START/STOP button in the center.
3. The Stinger beeps 2 times.
4. The battery monitor LEDs should provide an indication of
battery voltage level.
○ a. All 4 LEDs lit means the battery is fully charged.
○ b. 1 LED blinking means the battery is nearly drained.
5. To deactivate the Stinger, press the START/STOP button
again.
Change/Update User code
1. Make sure the Stinger is OFF.
2. Enter the 8 digit Mastercode (found on the KEEP IN A SAFE
PLACE card) In this example for Stinger 170100206, the Mastercode
would be: 43123433.
3. The battery meter should start blinking if you entered it
correctly.
4. Now enter the new four digit User code, then press the
start/stop button to turn the Stinger OFF.
5. Your new User code is now ready to be used and the old one
is deleted.
4
CAUTION: The Stinger is designed to operate cart ignitions and monitor
the battery power levels (*see battery meter advisory on back).
Therefore, it performs best under the specific set of conditions described
in the installation process. Please install exactly as directed. DO NOT
attempt to connect the Stinger in series to other accessories such as
speakers, lights, voltage regulators, etc. Doing so will hinder or prevent
optimum Stinger performance.
No more than 2 Amps of maximum current through the Stinger!
Make sure that connectors are mated correctly the first time.
Disconnecting and reconnecting this style of connector can damage
the factory crimped wiring assembly!
*The Stinger battery meter is designed to give helpful power level readings
for your electric cart. Various cart makes and models have differing power
configurations that result in slight readout inconsistencies. Although we
strive to provide as accurate a reading as possible, the battery meter
should be used as a guide. As you gain more experience with your Stinger,
you'll be able to understand better meter accuracy as you determine which
readouts coincide with your particular cart's power levels.