User's Manual

September 06, 2022
CLS-4-420-TH
5
INSTALLATION
PROFESSIONAL INSTALLATION
The CLS-4-420-TH 4Ch.4-20mA sensor is designed specically to operate within an electric power
generang facility. Incorrect installaon or conguraon of the wireless sensor may result in
unsasfactory performance. As such, only authorized personnel should be permied to install, congure,
and access, CLS-4-420-TH (the wireless sensor).
INTENDED USE
The CLS-4-420-TH is intended to be installed and operated in an indoor industrial environment only. The
wireless system is Class A equipment and may cause radio interference in residenal areas.
Only authorized, trained personnel are permied to possess, install, and operate the CLS-4-420-TH. The
device should be installed only in locaons where the general public has restricted access.
The CLS-4-420-TH is sold directly to electric ulity companies by Electronics4All Inc. and is not made
available on the retail market. Resale or otherwise making the device available to the general public is
not permied.
PRODUCT DISPOSAL
The CLS-4-420-TH is recycled by Electronics4All Inc. See the Contact Informaon secon to recycle the
CLS-4-420-TH.
MAINTENANCE AND CLEANING
Clean the enclosure and antenna using a clean dry cloth.
CONTACT INFORMATION
Electronics4All Inc.
110 Didsbury Road Unit 50
Kanata, ON
Canada K2T 0C2
1-613-284-2525
[e-mail]