User Instructions

Condenal
February 23, 2022
CLS-4-420-TH
7
GATEWAY OPERATIONAL SET-UP INSTRUCTIONS
1. Connect the Gateway to one of the four (4) router LAN ports using an Ethernet cable. Connect one
of the four LAN ports on the router to the laptop using an Ethernet cable. The Gateway has been
pre-congured to operate with a MQTT Broker at 192.168.0.10.
Router
192.168.0.10
Gateway
Ethernet Ethernet
2. Connect the AC/DC adapter to the Gateway. The Gateway will automacally turn on when power is
applied. The Gateway orange 'PWR' LED will turn on and the red 'Fault' LED will blink every two
seconds.
3. Start the MQTT Broker on the laptop by running "MQTT Broker" as an Administrator (Right-Click,
select Run as administrator). The MQTT Broker will open up a blank command window.