Assembly Instructions

FEBRUARY 11, 2022
CLS-4-420-th
8
ENCLOSURE ASSEMBLEY PROCEDURE
1
Remove the adhesive backing on the
membrane. Do not touch the exposed
adhesive aer backing removal.
2
Feed the membrane tail through the right
housing membrane slot.
3
Align the boom edge of the membrane
with the edge of the membrane cavity in
the le housing.
4
Press the membrane down onto the housing.
5
Place the Rotary Encoder Daughter CCA in
the housing.
6
Ensure the screw holes in the CCA are aligned
with the screw holes in the housing.