Assembly Instructions

FEBRUARY 11, 2022
CLS-4-420-th
27
9
Press and Hold PB1 buon unl the green
COM LED on the gateway turn OFF.
10
CLS-4-420-TH broadcast the data
packets to the gateway at 20 seconds
intervals, which in turn will forward the
data to electronics4all. The green COM
LED both on UUT and gateway will ash
one
11
Connect DROK Signal Generator to four (4)
channels of UUT.
12
Turn the knob of DROK Signal generator
in anclockwise direcon to set the
output to 4mA current.
13
The Gateway Visualizer will show 4 mA
current reading on all the four (4) channels.
14
Turn the knob of DROK Signal generator
in clockwise direcon to set the output
current to 20mA current.