Assembly Instructions

FEBRUARY 11, 2022
CLS-4-420-th
11
MAIN CIRCUIT CARD PROGRAMMING PROCEDURE
PRECAUTION
This procedure involves the handling of ESD sensive components.
ESD protecon measures should be employed.
COMPONENT LIST
Descripon
Manufacture
Part Number / Revision
X-Lab CLS-4-420-TH Main CCA
Electronics4All
Rev. 1.0
CLS-4-420-TH Test Firmware
Electronics4All
Rev. 1.0
Serial Number List
Electronics4All
NA
TOOLS AND MATERIAL LIST
1.
Computer
2.
Texas Instruments UniFlash Soware
3.
Texas Instruments CC2652R1 Development kit w/ Micro-USB cable
4.
JTAG Programming Cable
5.
Label Printer
PROCEDURE
1
Connect the JTAG programming cable to
CON301. The Green wire should align with
the connector pin 1 mark on the silkscreen.
2
Connect the JTAG programmer to the
computer.