Assembly Instructions

FEBRUARY 11, 2022
CLS-4-420-th
10
13
Install the rear housing into the slot in
the rear of the le housing. The TOP
direcon arrow should face towards the
antenna connector.
14
Install one (1) 4-40*0.375” screw using a #1
Phillips bit. Finger ghten the screw.
15
Install the right housing into the le
housing assembly. Install four (4)
3*35mm torx screw using Black Decker
Drill. Finger ghten the screw.
16
Screw the antenna onto the antenna jack
using a clockwise rotaon. Hand ghtens
only.