Operating Instructions

January 8, 2021
BMS-1001-TH BMS
18
WIRE CONNECTIONS
Ferrules are required on all wire input connecons to prevent loose wire strands from contacng
adjacent terminals. The Phoenix Contact 1827729 terminal plug accepts the following:
Connecon Type
Ferrule Tip Cross Secon
Conductor cross secon exible, with ferrule
without plasc sleeve
0.25 mm
2
to 1.5 mm
2
Conductor cross secon exible, with ferrule with
plasc sleeve
0.25 mm
2
to 0.5 mm
2
2 conductors with same cross secon, stranded,
with ferrule without plasc sleeve
0.25 mm
2
to 0.34 mm
2
2 conductors with same cross secon, stranded,
with TWIN ferrules with plasc sleeve
0.5 mm
2
Screw heads should be ghtened between 0.22 Nm to 0.25 Nm.
TRANSDUCER CONNECTIONS
CR5210
5
6
7
8
9
1
2
3
4
0V (GND)
SIGNAL
24 VDC
24 VDC
0V (GND)
SIGNAL
1827729
Transducer and BMS Mang Connector Pinouts
RATINGS
Parameter
Value
Voltage Output
24.00 VDC ± 5 %
Maximum Current Output
60 mA
Analog Input
± 5.00 VDC
Maximum Analog Input
± 5.50 VDC
Cauon: Do not exceed the maximum voltage or current rangs of the transducer
terminal.