Operating Instructions

January 8, 2021
BMS-1001-TH BMS
15
PAIRING
PAIRING STATUS
To determine if the BMS has been paired with a Gateway, press and release the PB1 pushbuon. If the
green COM LED turns on for 1 second, the BMS is paired with a Gateway. If the red COM LED turns on
for 1 second, the BMS is not paired with a Gateway.
PAIRING A BMS TO A GATEWAY
1. Place the target Gateway in Pairing Mode by pressing and releasing the PB1 pushbuon on the
Gateway. The green COM LED will turn on.
2. Press and hold the PB1 buon on the BMS. The red COM LED on the BMS will turn on for 1 second.
Release the PB1 buon on the BMS.
3. If pairing was successful, the green COM LED on the BMS will then turn on for 1 second, and the
green COM LED on the Gateway will turn o.
4. If pairing was not successful, the green COM LED on the BMS will not turn on and the green COM
LED on the Gateway will remain on. If this occurs, simply reaempt this step.
UNPAIRING A BMS FROM A GATEWAY
To unpair a BMS from a Gateway, press and hold the PB1 buon. Aer 5 seconds, the red COM LED will
start to ash rapidly. The PB1 buon may then be released. The BMS is now no longer paired from the
Gateway.