User's Manual

Devices settings

Now, the PND will appear the down menu only, and be used as a storage card.

You can browse the PND storage card and record some folders or files into it

freely throng PC such as a navigation map.

b. ActiveSync:

Please cut your PND connection whit the PC, newly turn on you PND and select

ActiveSync, connect your PND to the PC with USB cable.

For the first time, please note the change of PC and follow the steps to install the

connection. Tap “browse” button, open the motion device menu.

Now you can copy something in or out the PND on PC and the PND also can

perform synchronously along with PC.

4.1 GPS Receiver

NOTE: This page is for information only. You can view the number of satellite

signals the unit is receiving and also the strength of these signals.

1. Tap “GPS Receiver” button on the the Device Settings menu.

2. The GPS Receiver Function menu appears as shown below.

This page gives your current position in

degrees longitude and latitude, your current

speed and the status of your position, i.e.

Fixed 3D or Fixed Invalid etc.

The compass circle shows the satellites that

the unit is receiving and the bar chart below

shows the strength of the signal from each of these satellites.