User manual

Bijou
89
PRINTERS
The Bijou Console is equipped with a parallel
printer output port configured for Epson Standard
protocol.
Printers tested:
Citizen GSX-190
Panasonic KX-P1124
Citizen 200GX
Panasonic KX-P2023
Epson FX-870
SET UP PRINTER:
Load paper and test printer functions as identified
in printer
manual.
Configure printer for standard Epson protocol. Set
switch for
line-feed on carrige return.
Turn off power to printer.
Connect printer cable to console printer port.
Connect printer cable to printer output.
Turn on printer power.
DESIGNER’S REMOTE
The Bijou Consoles support a Designer’s Remote
console which offers duplicate keypad features
remote from the control console. Coupled with the
Bijou’s remote capacity, the
Designer’s Remote offers the features of the
console with interactive video support.
The Designer’s remote is supplied with a 4-pin XLR
connector on the rear output plate.
Connect this 4-pin XLR to a mated connector on a
receptacle plate or on the back of the console.
When connected, follow the instructuction for
connection of the Remote Video.