User manual

Bijou
88
the Cue. For this example, create macro 4
that says RUN POSITION 5.
2. Go to Cue list and put macro 4 on Cue 3.
When Cue 3 starts, position 5 comes up.
To clear the position, make another position
macro and add that into the next Cue. Actions
work in the same way.
Positions and actions are LAST ACTION. If a
position is started with a Cue (macro), press a
Submaster button (which has a position
loaded). The first position stops and the new
position starts.
REMOTE VIDEO
The console can be fitted to output the Super
VGA signal to remote locations (distances
greater than 25 feet). When fitted with this
option, the 4-pin XLR connector will output the
signal.
When installed with a system, a remote video
receiver is required to interface to a standard
SVGA monitor.
NOTE: Handle with care!
HOOK-UP OF REMOTE VIDEO
Connect 4-pin XLR from labeled video port at
station or back of the console
Connect SVGA monitor cable to DB 15-pin
lableld Monitor.
Connect 120VAC power transformer cable to
Power in position.
Configure Video output (item #3) on
Peripherals/Utiltiies menu screen.
Switch on SVGA.
KEYBOARD (optional)
The Bijou is designed to operate with any
standard IBM PC/AT keyboard.
If you encounter problems with using any
keyboard, please contact the factory.
Some manufacturers of AT aftermarket
keyboards have been known to be
incompatable.