User manual

Bijou
87
To run an action:
Press [Run] [Enter]. This runs the action
shown.
Example:
To stop an action:
Press [Run] [0] [Enter].
RUNNING POSITIONS AND
ACTIONS AS PART OF A SHOW
FROM THE STAGE SCREEN
By Keyboard:
• Action: Press [Run] (command shows
RUN ACTION) (see Figure 99). Then
press [5] [Enter].
• Position: Press [Run] [F2] (command
shows RUN POSITION) [8] [Enter].
• Number (e.g. [Run] [Enter]).
Loading Positions on a Submaster Handle:
Example:
1. Press [Sub-master] [5] [Run] [3] [Enter].
This puts position 3 on Submaster 5.
• The user can load up all 24 Submaster
handles.
• Only one position running at a time.
• To remove the position, hit
[Submaster][5][Run][0].
Creating a Macro:
Example:
To create a macro:
1. Press [Effect] [Effect] to go the Macro
Screen.
2. Press [F1] in the macro screen. This brings
up the special Macros.
3. Choose either RUN ACTION or RUN PO-
SITION.
4. Type in the number and press [Enter].
Started by a Cue:
Example:
1. Create a macro and place that macro in