User manual

Bijou
82
THE STEP KEY (Figure 93)
This key changes the resolution. This is mainly
used for 16-bit values. There are two choices:
Coarse and Fine.
COARSE: allows for large changes in the levels.
FINE: allows you to zero in on a specific spot.
THE SHIFT RIGHT KEY (Figure 94)
This key activates the hold function. The hold
function allows you to hold an attribute. You have
three choices of attributes: none, X, and Y.
Example:
If you choose to hold Y, its value does not change
when moving the wheel.
THE DEVICE KEY (F1)
This key changes the device being used.
THE MASTER KEY (F2)
Use this key to allow certain attributes on a num-
ber of attributes to track each other. The number
in the master column shows who is mastering
that device.
HOW IT WORKS
NONE: the device does not do anything.
STRAIGHT: the devices follow in the same direc-
tion (master goes right, slave goes right).
INVERTED: the devices follow in the opposite
direction (master right, slave left).
You can have one or all of the attributes follow
the master.
Figure 93-[Step] Key
Figure 94-[Shift Right] Key