User manual

Bijou

But you will find that if you are attempting to con-

trol a lot of Intelligent Lighting Fixtures that it can

be easier to have dedicated controls designed

specifically for that purpose. To provide that

EDI’s Bijou control console can be upgraded with

the addition of the Control Freak outrigger or, the

Bijou Plus comes with the Control Freak built in.

The following items and control commands are

for Bijou Plus consoles and Control Freak outrig-

ger and are not applicable to the standard Bijou

console.

SCREENS

• Type Setup Screen: This screen allows you

to create a profile of the type of fixtures being

used. To create a profile, assign the fixture’s

attributes (pan, tilt, color, etc.) to the wheels

of the Bijou Plus/Control Freak.

• Device Setup Screen: This screen assigns

physical devices to the desired starting ad-

dresses and fixture types.

• Position Setup Screen: This screen allows

you to create POSITIONS. POSITITIONS are

any combination of devices set at any posi-

tion, color, gobo, setting, etc. This is done by

moving the devices and setting the attributes

to the Bijou Plus/Control Freak’s wheels.

• Action Setup Screen: This screen allows

you to string a number of positions together

to form a sequence for timed movement.

TYPE SETUP SCREEN

This screen is where you create profiles of fixture

types (see Figure 83). To do this, list the attrib-

utes of the fixture. Examples of attributes are

color, pan, gobo, etc. The Bijou can handle up to

25 attributes.

Example:

To create profiles of fixture types:

1. Find the list of the feature’s attributes, either

Figure 83-Type Setup Screen