User manual

Bijou
74
Example:
To run and save the macro just created:
1. Press [Macro#] [1] [Enter]. This runs macro 1.
2. Press [Setup]. The setup screen is shown
3. Press [next] 3 times. “Save To Disk” is high-
lighted. (make sure that a disk is inserted.
4. Choose SAVE ALL.
5. Press [Enter] at the ARE YOU SURE? Com-
mand prompt. All the work is saved to disk.
TO DELETE A MACRO
From the Stage or Macro Screen, you can delete
any macro by pressing [Delete] [Macro] [#]
(number of the macro) [Enter]. A command
prompt asks, ARE YOU SURE? Press [Enter] to
confirm.