User manual

Bijou
7
To operate the Bijou console, carefully open the
packing/shipping boxes and locate the following:
• Control console
• Universal Power Pack/power cord (may be 2
pieces)
• Alphanumeric Keyboard (optional)
• VGA/SVGA display (may be owner provided)
• DMX cable (optional)
• Computer disk/s (PC format, 3.5” HD)
(optional)
1. Place the console on a stable, flat, and clean
surface that is large enough to hold all of the
accessories.
2. Place the VGA/SVGA display behind the
console in a comfortable viewing position.
3. Place the Alphanumeric Keyboard behind, or
to the side of, the console.
WARNING: Dust, smoke, and liquids can ruin
any piece of quality electronics. Keep
operation areas clean and do not allow
contamination of equipment.
REAR PANEL
Located on the rear of the console are the input
and output jacks, power jack, and the ON/OFF
power switch. Control cables furnished with the
console mate these outputs to the system
connection plates in your facility.
There are four types of connectors on the back of
the Bijou:
• Heavy duty XLR connectors
• Standard computer grade ‘D’ style connectors
• Standard computer grade ‘5’ pin DIN connec-
tors
• Ethernet jack (RJ-45)
All XLR connectors are keyed and locking. All
DIN connectors are keyed. Both XLR and DIN
connectors are rotated to align the key position
for insertion. Tighten thumbscrews to ensure
proper connection. All connectors mate smoothly
Section I: System Details and Assembly for Operation