User manual

Bijou
68
MERGING A SUBMASTER INTO A CUE
As stated at the beginning of this section, a Sub-
master is a GROUP of channels that are control-
lable from one Fader/handle. Many times, you
can speed the Cue recording process by calling
up a GROUP at a level rather than all of the indi-
vidual channels. The Bijou is capable of storing
288 different groups of looks to Submaster Fader/
handles. This is seen in the Cue building process.
Manually: Make the desired Submaster active on
the Stage Screen, and then raise its associated
Fader up to the desired output level. Then, you
record those levels into the desired Cue by using
the record sequence Cues. This works well, but
limits access to working Submaster group memo-
ries to the 24 active memories at any one time.
For access to all 288 groups of Submasters con-
trolled channels, use the control keys.
1. Press [Sub-master] and enter the number of
the Submaster memory. [0] [#] for memories
1-9 or [#] [#] for memories 10-24.
2. Press [F2] [#] (for the page number of the
Submaster you are trying to access (page 1-
12)).
3. Press [Enter] to complete the statement.
4. Use the submaster handle and set the level
Example:
Merge Submaster 2 on Page 2 into a cue at a
level of 75%. To do this:
1. Go to the Stage Screen.
2. Press [Sub-master] [2] [F2] [2]
3. Raise Submaster handle 2 to 75%
4. Re-record the cue.
SUB LIST SCREEN
This screen lists all of the Submaster memories,
in numerical order by page. You cannot do any
editing on this page. It is a read-only screen.