User manual

Bijou

Example:

To record a Submaster:

1. Press [Stage] to go to the Stage Screen.

2. Press [Sub-master] [F2] [#] (page) [Enter].

This takes you to the page number.

3. Press [Record] [Sub-master] [#] (Submaster)

[Enter]. Now the Submaster is recorded on a

specific page.

Example:

To record Submaster 3 on page 4:

1. Press [Stage] to go to the Stage Screen.

2. Press [Sub-master] [F2] [4] [Enter]. This takes

you to page 4.

3. Press [Record] [Sub-master] [3] [Enter]. This

records Submaster 3 on page 4.

DELETING A SUBMASTER

If you do not like the recorded Submaster memo-

ries, you can choose to delete all existing Sub-

master memory or an just an individual Submas-

ter. To get rid of all existing Submaster memory,

press: [Setup] [Next] [Next] (Clear Functions) [2]

(Clear Subs) [Enter].

Most of the time, you want to only get rid of one

or more of the Submaster memories.

Example:

You want to delete Pg: 2 Sub: 2.

1. Go to the Stage Screen.

2. Have the Submaster memory Pg: 2 Sub: 2

active at the bottom of the page.

3. Press [Sub-master] [F2] [2] [Enter]. This loads

page 2 Submaster memories.

4. Press [Delete] [Sub-master] [2] [Enter]. This

removes the Submaster memory from the

system.

Note: [Delete] [Sub-master] only works on the

Stage Screen.

SUBMASTER TYPE– NORMAL OR NOT

The Bijou’s default for all Submasters is: NORM,

or normal, manual operation. In this mode, to op-

Figure 76-Channel Bump Buttons