User manual

Bijou
64
dles:
1. Press (action key) [Sub-master] [F2]. This
brings up SUB PAGE in the command line at
the bottom of the screen, then the page num-
ber [1] though [1] [2] that you want active on
the stage. Then, [Enter] when finished. This
puts a green 2 above all Sub numbers, indi-
cating that page 2 of Submaster memories is
active on the Submaster fade handles.
2. Repeat the process to go back to page 1 by
pressing [Sub-master] [F2] [1] [Enter]. Now
no page number is listed after Pg:, indicating
that you are on default page 1.
Example:
To see how the NORM (green) operates:
1. Go to the Stage Screen.
2. Run Submaster 1’s Fader handle up and
down.
3. Watch the levels of channels 1-5 follow the
Fader with the output level shown in green;
increasing as the handle raises, decreasing
as the handle lowers.
WORKING SUBMASTERS ON MULTIPLE
PAGES
To increase the flexibility of the Bijou, it is possi-
ble to have Submaster memories from different
pages active on the Submaster fade handles at
the same time.
At this point, you have Sub: 01 (indicated in
green) active on page 1. Now, make Pg: 2 Sub: 2
(created in the section, Naming a Sub) active. To
do this, press [Submaster] [2] [F2] [2] [Enter].
Now, both Sub: 01 and 02 are in green, indicating
that Sub: 01 and 02 are active. Sub: 02 also has
a page number (Pg: 2) above it.
RECORDING SUBMASTERS FROM THE
STAGE SCREEN
To record a Submaster from the Stage Screen,
you must be on the Submaster Pg:# that you wish
to record to.