User manual

Bijou
63
Submaster when working/viewing it on the Sub
Preview Screen.
Example:
To enter a Submaster name:
1. For Submaster Pg 1 Sub 1, type in the name
WORK LIGHTS.
2. Press [Sub-master/List]. This returns to the
Sub List Screen and the name has been
entered.
Example:
To record a Submaster on Pg (page) 2:
1. Press [Sub-master/List] to go to the Sub Pre-
view Screen.
2. Press [F2] [2] [Enter]. The page number in
the lower part of the screen is now Pg 2.
3. Press [Sub-master] (Figure 75) [2] [Enter].
This changes the screen to reflect that you
are now working on Pg 2 Sub 2 (lower
screen).
4. Enter channels [6] [Thru] [10] [And] [2] [0] [At]
[5] [5] [Enter]. Channels 6, 7, 8, 9, 10, and 20
are now at a level of 55% maximum output
for this Submaster and the Type is NORM.
A Submaster does not exist unless it has at least
one channel with an output level entered.
OPERATION OF SUBMASTERS
Now that two Submasters are recorded, press
[Stage] to return to the Stage Screen. At the bot-
tom of the Stage Screen you find the following:
Pg: There are 12 pages of Submaster memories
available. This window allows you to select which
page of memories to record Submaster memories
to.
Sub: This is the Submaster handle location, 1-24.
At this point, you see no page numbers after PG:,
as page 1 is the default.
Example:
To change the page for all 24 Submaster han-
Figure 75-[Sub-master] Key