User manual

Bijou

sequence of keystrokes used in the Stage

Screen to enter times or types. The Cue Preview

Screen always opens to the same Cue that is live

onstage (Stage Screen). To change to a different

Cue, press [Cue] [#] [Enter] OR use the [Next]

[Last] keys to sequence through all of the Cues.

After accessing the desired Cue ([Cue] [#]), modi-

fication of the following Cues is allowed:

LINKING: To link the present Cue to any other

Cue out of numerical sequence. To link the two

Cues, press: [Cue] [#] (present Cue) [Enter] [F2]

[#] (Cue being linked to) [Enter]. From the Cue

List0 Screen, look at the present Cue and under

the column titled LINK, you now see the number

of the Cue that the present Cue is linked to.

TYPE: Press [Cue] [#] [Enter] to select a Cue.

Press [F3] to select a Cue type operation followed

by [Enter] to confirm selection.

TIME: Each press of the [Time] key advances you

from time up to time down delay and then to de-

lay on the up to delay on the down. Enter a time

in seconds and follow it by an [Enter] to confirm.

This makes the changes to the preset. The de-

fault up and down times are 5 seconds.

Example:

To enter an up and down time of 10 seconds for

Cue 1, enter:

[Cue] [1] [Enter] [Time] [1] [0] [Enter].

NAME OF CUE: At any time in this screen, use

the accessory alpha keyboard to give the se-

lected Cue a name.

CUE LIST SCREEN

This screen is a sequential listing of all Cues by

number with the operational attributes of the

Cues. To access any given Cue, use the [Page

Up] [Page Down] and [Next] [Last] keys (Figure

67) to cursor up or down to any given Cue or sim-

ply press [Cue] [#] [Enter] to quickly go to the de-

sired Cue. After accessing the desired Cue, modi-

fication of the following Cues is allowed: