User manual

Bijou
47
Example:
To create Cue 2 with an up time of 6 seconds, a
down time of 10 seconds, a delay on the up of 8
seconds, and a delay on the down of 7 seconds,
enter:
[Record] [2] [Enter] [Time] [6] [Time] [1] [0] [Time]
[8] [Time] [7] [Enter].
SETTING LEVELS VIA THE KEYPAD (DATA
ENTRY) & THE ENCODER WHEEL
Channel levels do not have to be set via the Fade
Handles. All 512 channels can be addressed
through the Action and Number Keys (Figures 53
and 54).
A cue can only be recorded in the Stage Screen,
but channel levels for that cue can be viewed and
changed from the Stage, Cue Preview, and
Track Screens via keypad entry.
To set channel levels via the keypad, start by en-
tering the channel(s) that need addressing. This
can be one channel at a time.
Example:
Press [Stage] [1] [At] [FL] [Enter]. Now on the
Stage Screen is CHANNEL 1 (yellow indicating it
is the channel addressed) at FL with the level
now in brown (not white). The brown indicates
that the level has been entered manually (via the
keypad) and has not been recorded to a Cue. To
change the level, simply re-hit the [At] key and
enter a new level.
Example:
To set all channels to the same level:
1. Press [Stage] [Enter]. This highlights all
channel numbers in yellow.
2. Press [At] [#] (level) [Enter]. All channel are
now set at the same level.
OR, simply press:
[Stage] [#] (channel number) [Thru] [#] (channel
number) [At] [#] (level) [Enter].
Examples:
To set channel 5 at a level of 50% from the Stage
Figure 54-Action Keys Figure 53-Number Keys