User manual

Bijou

the operator by letting them know what key-

strokes are logical for the present operation. This

screen is a dynamic screen and changes as the

you input data to reflect the next keystroke

choices.

Example:

If you enter a channel number, the screen

changes to tell the operator that the next logical

keys are [And], [Thru], [Except], or [At].

This screen works in conjunction with the key-

stroke command line that appears in white in the

lower left portion of the screen. Look at the Help

section with every keystroke on the Stage

Screen to understand the function of the key-

stroke.

Once the Help section is no longer needed, turn it

OFF by pressing [Setup] [Next] (Default Settings

2) [1] (Display Help) [F3] (No) [Enter].

CROSS FADER DISPLAY

The Cross Fader Display (Figure 40) is divided in

half. The left-hand side displays the status of the

XY Faders and the right-hand side displays the

status of the AB Faders. This display will be de-

scribed in detail in various sections of this man-

ual.

SUBMASTER OUTPUT DISPLAY

Directly below the Cross Fader Display is the

Submaster Output Display. The functions of this

display are detailed in the Submaster Section.

TO OPERATE IN 2-SCENE MANUAL

MODE

Note: If your Bijou is the Memory Operation Only

version, and does not have two rows (one above

the other) of Fade Handles on the left end of the

console, skip this section.

Figure 40-Cross Fader Display

Figure 41-Submaster Output Display