User manual

Bijou
32
ode, and fluorescent that need a higher starting
current to ignite/light.
Profiles Number 8-25 are user-configurable to
allow you to modify dimmer outputs. To modify a
Profile, navigate to it by using the [Next] [Last]
keys or use [F3] followed by the desired Profile
Number.
Example:
To modify Profile 17:
1. Select Profile 17 by hitting [F3] [1] [7] [Enter]
2. Enter the percentage of the Fader output
from the top row.
3. Press the [At] key.
4. Enter the percentage of the dimmer input de-
sired.
5. Press the [Enter] key.
Example:
To make Profile 17 have a dimmer output of 30%
when the Fader is at 45, the sequence is:
[4] [5] [At] [3] [0] [Enter].
Note the change in the 45% column of Profile 17.
To clear any modifications made to profiles on
this screen:
1. Go to the Setup Screen [Setup].
2. Press [Next] [Next]. This takes you to Clear
Functions.
3. Press [8].
4. Press [Enter] at the ARE YOU SURE?
prompt.
5. Return to the Patch Screen. The change
made to the profile has been cleared.
All 25 profiles may be modified to suit your needs.
It is suggested that Profiles 1-7 be left at the fac-
tory defaults.
OPERATING THE BIJOU AS A
MANUAL CONTROL CONSOLE
Before operating the Bijou, it is necessary to com-
plete the first ten steps of Section II. Once these
steps are completed, simply press the [Stage] key
to proceed.