User manual

Bijou
30
PARKING
Parking a dimmer allows you to turn the dimmer
ON to a specific level that cannot be turned OFF
with the Grandmaster Fader, Blackout switch, or
with inhibitive Submasters. This is helpful when
you need to use a dimmer circuit for backstage
work lights that need to stay ON during onstage
blackouts. Another use is controlling music stand
lights in the orchestra pit. As most light stands are
too bright, Parking allows you to dim the lights to
a level both comfortable for the musicians and the
audience.
To Park a dim:
1. Select the DMR number. Enter [At]
2. Enter [FL] for the CHN (channel). Enter [At]
3. Enter the LEV for dimmer output.
Example:
To Park Dimmer 1 at 80%, use the following se-
quence:
[1] [At] [FL] [At] [8] [0] [Enter].
Note that in the LEV for DMR 1 on the screen, it
shows PRK in green. This indicates to you that
the dimmer has been parked. Now, every time
you turn ON the control console, Dimmer 1 turns
ON to a level of 80%.
To clear the Patch back to a One-To-One Patch,
LVL full, using Profile 1 you can choose one of
two options:
A. To clear only the Patch page currently being
worked on, press [F1] [Enter].
B. To clear both Patch pages, go to the Setup
Screen [Setup] and press [Next] [Next] (Clear
Functions) [5] (Clear Patch) [Enter].
For the purpose of learning the board, clear both
pages back to One-To-One at this time.
PROFILE SCREEN
Definition: A Profile is used to determine the rela-