User manual

Bijou
29
Another way to do this is to use the [F3] (figure
35) Edit key in the sequence to select what you
wish to change.
Example:
If the you want to change the LEV of DMR 6, 7, 8,
9, 10, and 12 to 75% without changing the CHN
(channel) assignments, the sequence using the
[F3] key ( is: [6] [Thru] [1] [0] [And] [1] [2] [At]] [F3]
[7] [5] [Enter].
As you press the [F3] key, note that the EDIT
prompt box, located in the lower left of the
screen, changes from CHANNEL to LEVEL to
PROFILE with each key hit.
Example:
To modify only the PRF (profile), enter:
[6] [Thru] [1] [0] [And] [1] [2] [At] [5] [Enter].
Or, using the [F3] key, the sequence is:
[6] [Thru] [1] [0] [And] [1] [2] [At] [F3] [F3] [5]
[Enter].
NON-DIM
Dimmers can be patched and operated as Non-
Dim. A Non-Dim goes from 0 to 100% instantly. A
Non-Dim can be used to turn on fog machines,
mirror balls, prop radios, or televisions. To assign
a dimmer as a Non-Dim, select the DMR and as-
sign it to a CHN. Then, press the [At] [.], followed
by a LEV. The LEV in this case is the position in
the fade where the Non-Dim turns ON or off.
Example:
To make DMR 5 a Non-Dim, which turns ON as
channel 3 reaches 65%, the sequence is:
[5] [At] [3] [At] [.] [6] [5] [Enter].
On the screen is a red N next to the LEV of 65.
The red N indicates that the associated dimmer is
now a Non-Dim (ON/OFF).
Figure 35-[F3] Key