User manual

Bijou
22
user-recorded information to disk. This pro-
vides a backup in the event that the board
memory is overwritten.
9. FORMAT DISK: Formats a floppy disk so that
it can store Bijou shows.
LOAD FROM DISK (Figure 23)
The Load From Disk Menu is used to transfer
prerecorded information from the disk to the
memory of the control console. This menu allows
the individually listed items to be transferred one
at a time. Or, by selecting number 8, all items can
be loaded at the same time.
1. LOAD CUES: Load From Disk function allows
you to selectively load Cue portions of mem-
ory from disk to console memory.
2. LOAD SUBS: Load From Disk function allows
you to selectively load Submaster portions of
memory from disk to console memory.
3. LOAD EFFECTS: Load From Disk function
allows you to selectively load Effects portions
of memory from disk to console memory.
4. LOAD MACROS: Load From Disk function
allows to selectively load Macros portions of
memory from disk to console memory.
5. LOAD PATCH: Load From Disk function al-
lows you to selectively load patch portions of
memory from disk to console memory.
6. LOAD PROFILES: Load From Disk function
allows you to selectively load profile portions
of memory from disk to console memory.
7. LOAD CF INFO: Load From Disk all moving
light information from disk to console memory
8. LOAD ALL: Loads all from disk and over
writes console memory.
A disk may be write protected to prevent altera-
tion of stored data. To write protect a disk:
1. Orient the diskette so that the round metal
circle is pointed towards you.
2. Push the write protect tab (located in the
lower right-hand corner) down to open the
slot. When this slot is open, the disk is pro-
tected and no new data can be recorded. A
Write Protected disk causes an UNFOR-
Figure 23-Load Disk Options