User manual

Bijou
18
processor memory.
3. ONE SCENE: Toggles between 2-scene pre-
set and 1-scene preset manual operation for
consoles with 2-scene manual operation fea-
tures. To change, use [F2] or [F3], then press
the [Enter] key.
4. ACTIVE PATCH PAGE: Sets the patch page
number. The Bijou can use one of three indi-
vidual dimmer-to-channel (assignment)
patches. Default is one-to-one. With this de-
fault, every dimmer in the system is controlled
by a channel of the same numeric placement
at a maximum level of 100% (FL) and is using
the default Profile #1.
To select a patch for operation, enter:
[0] [Enter].
For one-to-one, enter:
[1] [Enter] for Patch Page 1, or [2] [Enter] for
Patch Page 2.
5. CUE DEFAULT TRACK: YES places the de-
fault for all Cues being recorded as Tracking
Cues. NO places the default for all Cues be-
ing recorded as Preset Cues.
• TRACKING CUE: You can create a Cue
without setting a level for a channel
(although that channel had a level in the
previous Cue). The level for the new
channel TRACKS through and into the
Cue being created.
• PRESET CUE: You must create a Cue
with a set level for the channel, regard-
less of whether the channel had a level in
the previous cue.
6. RECORD SUBS IN A CUE: YES indicates
that when a Submaster is active, the Sub-
master’s output (live, on stage) is recorded as
part of any Cue or Submaster that you record
in the stage screen. NO means that Submas-
ters can be in use but will not be recorded
into Cues.
7. DISABLE EDITING: YES means that you
cannot accidentally record over Cues,
patches, Subs, Effects, disks, etc. without first
coming to this screen and changing the se-
lection to NO.
8. WHEEL EFFECTS NULL: A null level means
NO LEVEL and is not the same as a level of
0. If Yes is selected, all selected channels