User manual

Bijou
16
NUMBER KEYS
For the following keys refer to Figure 16:
NUMBER KEY PAD
Number Keys are the primary means of entering
values into Cues, times, Submasters, and Effects.
Number Keys are always reflected on the system
Command Line (lower left screen).
NUMBER KEYS [1] through [0]
Make a selection by entering the value of the
Command Line.
DECIMAL KEY [.]
Inserts additional steps between whole number
Cues or to identify tenth seconds in timing opera-
tions.
FL KEY [FL]
Also called FULL, this key assigns a value of
100% to a level in a command line sequence.
ENTER KEYS [Enter]
The final keystroke in most command line se-
quences.
Example:
[2] [5] [Thru] [3] [2] [And] [9] [8] [At] [FL] [Enter].
XY & AB FADER CONTROL KEYS
For the following keys refer to Figure 17:
The Fader Control Keys are the primary means of
assigning control functions to the two sets of
Cross Faders for playback. Fader keys coordi-
nate with the Fader display on the Stage Screen.
Fader keys can load, start, stop, reverse
(backup), or take manual control of a fade.
[Load]
Loads a Cue stack to the desired Fader. Oper-
ates as a READY TO FADE INTO or as a GO TO
(faded into immediately) function, depending on
selections made in Setup Screens.
[Fade Take]
Selects Manual or Automated actions with
prerecorded times for Cues loaded to the Cross
Figure 17-XY & AB Fader Control Keys
Figure 16-Number Keys